DataCard RP90 Plus E Hardware And Driver Installation Manual page 28

18.
The printer is installed with sharing enabled by default. Use the default name or enter
a "Share name" if needed, and then click Next. The Share name cannot contain any
spaces.
•
•
19.
Choose Create a new port: and then click Next.
RP90 Plus E Card Printer Installation Manual
To share the printer, see
page 32. The printer name used in this section is Datacard
Sharing can be disabled after the driver is installed, if needed.
"Sharing a Printer on a Network Connection" on
®
RP90 Plus E LAN.
25