Printing Info; Resetting The Rf Network - Monarch 9433 SNP System Administrator Manual

Printing Info

Use 3.0" x 1.2" or 3.0" x 1.5" supply or
information may print off the label.
From the RF Network menu, select
1.
Print Info. Three wireless network
information labels print.
The first label contains radio version
information. The second label contains
the RF (wireless) settings, including the
SSID, security, and signal strength.
The third label contains TCP/IP settings,
including the IP address, boot method,
etc.
Press any A to return to the RF
2.
Network menu.

Resetting the RF Network

After you save the configuration, you must
reset the RF network before the changes
take effect. When you select "Reset," the
printer turns off and back on.
Note: You may lose your current connection
and application. Resetting the network
may take up to one minute before you
can access the wireless print server
(radio).
1. From the RF Network menu, select Reset.
RESET
Reset command sent
Hit key to continue
Press any A to return to the RF Network menu.
2.
The printer is ready to use.
Mona rch Prin t Se rv er Status
MAC:
Prin ter Mo de l:
Boot Ver :
Application:Peg3-1.0 (2 007 .03.05)
Wireless In fo rmation
SSID:
Mode :
S pee d :
Secu rity :
Sig. Streng th :
Actual SSID:
Assoc. AP MAC: 00-a0 -f8-aa-83 -25
T CP /IP
IP Address:
Subn et Ma sk :
R ou ter :
(set manually)
Boo t Me tho d:
Boot Retrie s:
Timeout:
Keep aliv e :
Configuring the 802.11b/g and IP Settings 2-15
00-a0 -f8-5f-72-0b
9 433 SNP
Vers ion 1.0
Label 1
MON 123
INFRAST RUCTURE
1 1 mb ps
WEP 128 bit
1 00
MON 123
Label 2
192.0.0.192
255 .25 5.0 .0
192 .0.1 92 .0
STAT IC
4
0 min
1 min
Label 3