Enable Debug Logs For Radius; Configuring Radius Using Gui; Configuring Radius Server - Motorola WS5100 Series Migration Giude

9-6 WS5100 Series Switch Migration Guide
2. Connect the MU to the ssid of the wlan 1, with proper user profile. The user profile in the MU should have
the following parameters to connect to the wlan1.
The user name bob
User password as secret!!
EAP type TTLS
Auth type md5
The user bob will get access only on Saturday's & Sunday's from 12pm to 3pm
3. While proxying the request to the remote home server, The MU user profile should be
The user name: user@symbol.com
User password: symbol
4. The remote home server configuration
users file default location:/usr/local/etc/raddb/user:
add this entry: user@symbol.com, Auth-Type:= Local, User-Password == "symbol"
clients.conf file
client 157.235.208.0/24 {
secret = symbol
shortname = wios

9.2.2 Enable Debug Logs for Radius

Execute the command given below to enable debug logs (errors, info, warning, all logs) for Radius.
WS5100# debug radius all

9.3 Configuring Radius using GUI

Setting up Radius on the switch entails configuring the following:
• Configure Radius server
• Configure WLAN
• Configure LDP

9.3.1 Configuring Radius Server

Follow the steps mentioned below to configure Radius server: