Shutting Down The Switch; Shutting Down The Switch Using The 1.4.X/2.X Shutdown Command - Motorola WS5100 Series Migration Giude

2-4 WS5100 Series Switch Migration Guide
Username: restore
When prompted to enter a password enter
reasons the password you enter is not displayed.
Password:
4. When the warning prompt appears type
WARNING:This will wipe out the configuration (except license key) and user
data under "flash:/" and reboot the device
Do you want to continue? (y/n):y
Switch will be rebooted with default configuration...
The system is going down NOW !!
5. Once the switch has rebooted login using the default username and password.

2.3 Shutting Down the Switch

The CLI commands used to shutdown the switch have changed with the release of the 3.0 version WS5100
Series Switch. Please refer to the following to differentiate between the shutdown command (1.4.x and
2.x) from the halt command (3.0).

2.3.1 Shutting Down the Switch using the 1.4.x/2.x Shutdown Command

To gracefully shutdown the WS5100, issue the shutdown command from the configure context in the CLI:
WS5000.(Cfg)> shutdown
This command will halt the system.
A manual power cycle will be required to re-start the switch.
Do you want to proceed (yes/no) : yes
System shut down might take a few mins....
Shutting down the switch...
Shutting down dhcp daemon.. done
Shutting down apache server in the OPEN mode...done.
Shutting down cell controller........ done
Shutting down snmpd agent...done.
Shutting down Postgres....done.
INIT: Sending processes the TERM signal
Hostname: WS5000.motorola.com.
Shutting down PacketSwitch interface
Shutting down dhcp daemon.. done
Shutting down apache server in the OPEN mode...done.
Cell controller not running.
i2c-core: Device or resource busy
Shutting down Postgres....done.
Stopping periodic command scheduler: cron.
Stopping internet superserver: inetd.
Saving random seed... done.
Stopping deferred execution scheduler: atd.
Stopping kernel log daemon: klogd.
Stopping system log daemon: syslogd.
flushing ide devices: hda
restoreDefaultPassword
y and press Enter. The following will display:
.....
and press Enter. For security