Motorola WS5100 Series Migration Giude page 14

2-2 WS5100 Series Switch Migration Guide
To display the switch Web UI:
1. Point the browser to the IP address assigned to the wired Ethernet port (port 2). Specify a secure
connection using the
The switch login screen displays:
2. Enter the User ID admin, and Password superuser. Both are case-sensitive. Click the
NOTE: If using HTTP to login into the switch, you may encounter a Warning screen if a
self-signed certfificate has not been created and implemented for the switch. This
warning sceen will continue to display on future login attempts until a self-signed
certificate is implemented. Motorola recommends only using the default certificate for
the first few login attempts until a self-signed certficiate can be generated.
NOTE: If your password is lost, there is a means to access the switch, but you are forced
to revert the switch back to its factory default settings and lose your existing
configuration (unless saved to a secure location). Consequently, Motorola recommends
keeping the password in a secure location so it can be retrieved. For information on
password recovery, see
Once the Web UI is accessed the Switch main menu item displays a configuration tab with high-level
switch information. Click the
Once the switch is fully configured, the dashboard is the central display for the user to view the version
of firmware running on the switch, quickly assess the last 5 alarms generated by the switch, view the
status of the switch's Ethernet connections and view switch CPU and memory utilization statistics.
NOTE: The chapters within this System Reference Guide are arranged to be
complimentary with the main menu items in the menu tree of the switch Web UI. Refer to
this content to configure switch network addressing, security and diagnostics as required.
https:// protocol.
Switch Password Recovery on page
Show Dashboard
2-3.
button to display an overall indicator of switch health.
Login button.