Creating A User - Motorola WS5100 Series Migration Giude

9-10 WS5100 Series Switch Migration Guide
c. Use Time of Access Start
the switch managed network.
Each user within the group will be authenticated with the local Radius server. Those group members
successfully authenticated are allowed access to the switch managed network using the restrictions
defined for the group.
d. Use Time of Access End
within the switch managed network. After this time, users within this group will not be
authenticated by the local Radius server.
However, if a user is part of a different group that has not exceeded their access end interval, then
the user may still interoperate with the switch (remain authenticated) as part of that group.
e. Use the
from the available list to the
Once on the configured list (and the changes applied), the members of this group can interoperate
with the switch on these WLANs (once authenticated by the local Radius server).
f. The Configured WLANs
users are configured). Use the Add -> and Remove <- functions to move WLANs from the available
list to the configured list.
g. In the Time of Access in days
week you would like this new group to have access to the switch managed network using the
WLANs configured.
h. Click OK

9.3.1.4 Creating a User

Follow the steps mentioned below to create a user and assign him to the group created in
1. Click on Users
2. Click on the
field to set the time the group is authenticated to interoperate within
field to set the time each group's user base will loose access privileges
Available WLANs Add -> and Remove <- functions to move WLANs for this new group
Configured WLANS
columns displays the WLANs this new group can operate within (once
section, select the checkboxes corresponding to the days of the
to use the changes to the running configuration and close the dialog box.
tab in the main Radius Server window. It displays the existing users for the Radius server.
Add button to add a new user.
list.
Creating a Group.