10-14 WS5100 Series Switch Migration Guide
a. Use the
options include – Ethernet 1, Ethernet 2, VLAN 1 and VLAN 1.
b. Use the
3 interface.
c. Click on
10.5.2 Configuring MAC Extended ACL
To configure MAC Extended ACL using Web UI, follow the steps mentioned below:
1. Click on
Security
Configuration
2. To add a new ACL, click on the
a. Select an Extended IP List from
addresses, VLAN ID and optional protocol type information.
b. Click
OK
Interface
drop-down menu to select the interface to configure on the switch. Available
IP ACL
drop-down menu to select an IP ACL used as the inbound IP for the layer 2 or layer
OK
button to save the changes and close the dialog box.
>
ACL
from the main menu tree. The ACLs window by default displays the
tab.
Add
button in the ACLs section.
ACL Type
and close the dialog box.
drop down box. This uses source and destination MAC