Optional Settings - Yaesu FTM-350 Series Manual

T
D P
IGIPEATER ATH
The FTM-350 allows you to set up to eight digipeaters for the APRS packet path.
The FTM-350 is preset to "WIDE1-1" and "WIDE1-1, WIDE2-1" digi-path to insure that
your transmitted APRS beacon is repeated by the New-N paradigm digipeaters. We recom-
mend that you use this default setting.
1. Press the [ SET ] key to enter the Set Mode.
2. Rotate the left side [ DIAL ] knob to select "APRS/PKT" group, then press the left side
[ DIAL ] knob.
3. Rotate the left side [ DIAL ] knob to select Set Mode item "E19 DIGI PATH SELECT",
then press the left side [ DIAL ] knob to enable selection of this Set Mode item.
4. Rotate the left side [ DIAL ] knob to select the desired path, then press the left side
[ DIAL ] knob.
5. When you have completed your selection, press the [ ESC ] key several times to exit
from Set Mode.
T F-3 F
HE UNCTION
Open the "Station List" window.
SLIST
Open the "Message List" window.
MSG
Toggles the key lockout feature "on and "off" by pressing the key.
F-3
LOCK
Toggles the transceiver's power "on and "off" by pressing and holding the key.
Changes the APRS beacon: OFF, ON ( FIX ) , or SMART .
BCON
Transmit the APRS beacon.
B-TX
FTM-350 S
ERIES
RANSMIT AN
O
PTIONAL
S
ETTING
[ SMART FUNCTION ]
C
OMMANDS OF THE
APRS ® M
ANUAL
APRS
S
ETTINGS
KEY FOR
B
®
EACON
APRS O
PERATION
9