Yaesu FTM-350 Series Manual page 30

APRS/PKT S
E15: COM PORT SETTING
Function:
Available Values:
Default:
SPEED:
OUTPUT:
Important Note: If you connect your personal computer to the FTM-350, verify the correct
settings for "E16: DATA BAND SELECT" and "E17: DATA SPEED".
E16: DATA BAND SELECT
Function:
Available Values:
Default:
Note: An "A A A A A " icon appears in the S- meter area of the APRS operation band. A "D D D D D " icon
appears in the S- meter area of the DATA operation band.
E17: DATA SPEED
Function:
Available Values:
Default:
30
ET
Sets the COM port setting.
1 SPEED: 4800 bps, 9600 bps, or 19200 bps
2 OUTPUT: OFF, GPS OUT, or PACKET
1 SPEED: 9600 bps
2 OUTPUT: OFF
This item selects the baud rate of the COM port which connects the
optional packet cable.
This item selects the type of data output to the COM port.
When this item is set to "OFF", the FTM-350 does not output any
data from the COM port.
When this item is set to "GPS OUT", the FTM-350 outputs the GPS
data (NMEA data: GGA & RMC) from the COM port.
When this item is set to "PACKET", the FTM-350 outputs the Packet
data from the COM port.
Selects the operating band for the DATA mode.
1 APRS: MAIN BAND, SUB BAND, L-BAND FIX,
R-BAND FIX, L=TX / R=RX, or L=RX / R=TX
2 DATA: MAIN BAND, SUB BAND, L-BAND FIX, R-BAND
FIX, L=TX / R=RX, or L=RX / R=TX
1 APRS: SUB BAND
2 DATA: MAIN BAND
Selects the baud rate for the DATA mode.
1 APRS: 1200 bps or 9600 bps
2 DATA: 1200 bps or 9600 bps
1 APRS: 1200 bps
2 DATA: 1200 bps
M
ODE
FTM-350 S APRS ® M
ERIES ANUAL