Yaesu FTM-350 Series Manual page 18

T
RANSMIT AN
S F
TORE THE IXED
The FTM-350 allows you to store eight fixed form messages (up to 16 characters for each
message).
1. Press the [ SET ] key to enter the Set Mode.
2. Rotate the left side [ DIAL ] knob to select "APRS/PKT" group, then press the left side
[ DIAL ] knob.
3. Rotate the left side [ DIAL ] knob to select
Set Mode item "E04 APRS MESSAGE
TXT", then press the left side [ DIAL ] knob
to enable modification of this Set Mode item.
4. Rotate the left side [ DIAL ] knob to select the Message register (1 - 8) you wish to store
your message to.
5. Press the left side [ DIAL ] knob to begin message entry into the selected register.
6. Enter the message using the same procedure
as described previously.
7. When you have completed your message
entry, press the [ ENT ] key to save the new
setting, then press the [ ESC ] key several times to exit from Set Mode.
The FTM-350 provides many convenient functions for APRS operation. Refer to the "APRS/
PKT Set Mode" chapter beginning with page 20 for details.
18
APRS
F M
ORM ESSAGE
M
®
ESSAGE
FTM-350 S
ERIES
APRS ® M
ANUAL