Yaesu FTM-350 Series Manual page 3

left side [ DIAL ] knob then press the left side [ DIAL ] knob to save the new setting, and
then skip to step 19. Otherwise, select "MANUAL" by rotating the left side [ DIAL ]
knob and advance to the next step.
Note: You may choose your position from the "Point" memories stored on the GPS
Point List.
16. Press the [ ESC ] key to save the new setting
and exit from Set Mode item "E29 MY
POSITION SET", then rotate the left side
[ DIAL ] knob to select Set Mode item "E30
MY POSITION".
17. Press the left side [ DIAL ] knob twice, then enter your position (Longitude/Latitude) by
using the left side [ DIAL ] knob (select the number/character) and [
move the cursor).
18. Press the [ ENT ] key to save the new setting, then press the [ ESC ] key to exit from Set
Mode item "E30 MY POSITION".
19. Rotate the left side [ DIAL ] knob to select Set Mode item "E05 APRS MODEM".
20. Press the left side [ DIAL ] knob, then rotate
the left side [ DIAL ] knob to select "ON".
21. Press the left side [ DIAL ] knob to save the
new setting, then press the [ ESC ] key twice
to exit from Set Mode.
When the APRS modem is activated, an "A12"
icon appears above the "Right" band frequency
display.
The FTM-350 provides many convenient functions for APRS operation. Refer to the "APRS/
PKT Set Mode" chapter beginning with page 20 for details.
SSID
Non
-10
-11
-12
-13
-14
-15
FTM-350 S
ERIES
Home Station, Home Station IGate
-1 Digipeater
-2 Digipeater
-3 Digipeater
-4 HF to VHF Gateway
-5 IGate (not Home Station)
-6 Operation via Satellite
-7 Hand-held Transceiver, such as VX-8R
-8 Maritime Mobile
-9 Mobile Transceiver, such as FTM-350R
Operation via Internet
APRS touch-tone User (and the Occasional Ballooes)
Portable Units, such as Laptops, Camp Sites etc.
Not Used
Trackers
HF Operation
APRS ® M
ANUAL
P
SSID L
IST
D
ETAILS
REPARATIONS
 
] / [ ] key (to
3