Yaesu FTM-350 Series Manual page 2

P
REPARATIONS
Before performing any APRS
tifier), and symbol into the FTM-350, and activate the AX.25 Data Modem via the Set
Mode.
1. Press the [ SET ] key to enter the Set Mode.
2. Rotate the left side [ DIAL ] knob to select "APRS/PKT" group, then press the left side
[ DIAL ] knob.
3. Rotate the left side [ DIAL ] knob to select
Set Mode item "E28 MY CALLSIGN",
then press the left side [ DIAL ] knob twice.
4. Rotate the left side [ DIAL ] knob, or press
one of the microphone keypad buttons, to select the first letter or number in your callsign.
5. After selecting the first digit of the DTMF string, using the left side [ DIAL ] knob, press

the [ ] key to move to the next digit.
6. Repeat steps 4 and 5 as many times as necessary to complete your call sign.
7. You may backspace the cursor by pressing the [
8. When you have completed entering your callsign, press the [
SSID slot.
9. Rotate the left side [ DIAL ] knob to select the SSID, then press the [
new setting.
10. Press the [ ESC ] key to exit from Set Mode item "E28 MY CALLSIGN", then rotate
the left side [ DIAL ] knob to select Set Mode item "E31 MY SYMBOL".
11. Press the left side [ DIAL ] knob, then select the desired preset symbol by pressing one
of the [ ICON1 ] ~ [ ICON3 ] or [ USER ] keys.
To choose another icon, rotate the left side
[ DIAL ] knob to select the desired symbol
after having pressed either key. You may
choose 1 of 46 different symbols.
12. Press the [ ESC ] key to save the new setting and exit from Set Mode item "E31 MY
SYMBOL", then rotate the left side [ DIAL ] knob to select Set Mode item "E32 POSI-
TION COMMENT".
13. Press the left side [ DIAL ] knob, then rotate
the left side [ DIAL ] knob to select the de-
sired comment. You may choose 1 of 15 dif-
ferent comments.
14. Press the [ ESC ] key to save the new setting and exit from Set Mode item "E32 POSI-
TION COMMENT", then rotate the left side [ DIAL ] knob to select Set Mode item
"E29 MY POSITION SET".
15. Press the left side [ DIAL ] knob. When the
optional GPS Antenna Unit is connected to
the transceiver, select "GPS" by rotating the
2
® operations, set your callsign, SSID (Secondary Station Iden-

] key.

FTM-350 S
ERIES
] key to move to the

] key to save the
APRS ® M
ANUAL