Aprs Filter Setting - Yaesu FTM-350 Series Manual

R
ECEIVING AN
APRS F S
ILTER
The APRS filter option allows you to select the specific types of the data to receive.
1. Press the [ SET ] key to enter the Set Mode.
2. Rotate the left side [ DIAL ] knob to select "APRS/PKT" group, then press the left side
[ DIAL ] knob.
3. Rotate the left side [ DIAL ] knob to select Set Mode item "E03 APRS FILTER", then
press the left side [ DIAL ] knob to enable modification of this Set Mode item.
4. Rotate the left side [ DIAL ] knob to select the "filter" you wish to exclude.
5. Press the left side [ DIAL ] knob, and then rotate the left side [ DIAL ] knob to select
"OFF".
6. Press the left side [ DIAL ] knob to save the new setting.
7. Repeat the above steps and select "OFF" for any other filters you wish exclude.
8. When you have completed your selection, press the [ ESC ] key several times to exit
from Set Mode.
The FTM-350 provides many convenient functions for APRS operation. Refer to the "APRS/
PKT Set Mode" chapter beginning on page 20 for details.
EMERGENCY COMMENT Set
EMERGENCY BEACON Received
BEACON Received ( APRS Filter "ON" )
BEACON Received ( APRS Filter "OFF" )
BEACON Received ( Range Ringer Station )
BEACON Received ( Callsign Ringer Station )
6
APRS
ETTING
APRS A
BEACON Received ( Duplicate Beacon )
x 3 times
OWN BEACON ( MY POSITION ) Received
x 12 times
GROUP/BULLETIN MESSAGE Received
MESSAGE Received ( for Other Station )
MESSAGE Received ( Duplicate Message )
B
®
B L
LERT EEP IST
MESSAGE Received
FTM-350 S
EACON
OWN MESSAGE Received
MESSAGE ACK Received
MESSAGE REJ Received
BEACON Transmit
MESSAGE Transmit
MESSAGE REJ Transmit
APRS
ERIES
® M
ANUAL