Yaesu FTM-350 Series Manual page 26

APRS/PKT S
E09: APRS RINGER ( CALL )
Function:
E10: APRS TXDELAY
Function:
Available Values:
Default:
E11: APRS UNIT
Function:
Available Values:
Default:
E12: BEACON INF SELECT
Function:
Available Values:
Default:
AMBIGUITY:
SPD/CSE:
26
ET
Programs the callsigns, which causes a ringing bell sound when the
"5 CALL RINGER" function of the Set Mode item "E08 APRS
RINGER" is set to ON.
You may program up to eight callsigns.
Selects the transmission delay time between transmitting the APRS
data and transmitting a preamble (flag code) prior to the APRS data.
100ms, 150ms, 200ms, 250ms, 300ms, 400ms, 500ms, 750ms, or
1000ms
250ms
Selects the unit for the APRS operation.
1 POSITION: . mm' or ' ss"
2 DISTANCE: mile or km
3 SPEED: mph, knot, or km/h
4 ALTITUDE: ft or m
5 BARO: mb, mmHG, inHg, or hPa
6 TEMP: °F or °C
7 RAIN: inch or mm
8 WIND: mph, knot, or m/s
Depends on the transceiver version.
Sets the TX Beacon format.
1 AMBIGUITY: OFF, 1digit, 2digits, 3digits, 4digits
2 SPD/CSE: ON or OFF
3 ALTITUDE: ON or OFF
1 AMBIGUITY: OFF
2 SPD/CSE: ON
3 ALTITUDE: ON
Remove the selected number of digits from the position data (Lat/
Log).
Example: OFF:
1digit: 35°38.1
2digits: 35°38.
3digits: 35°3 .
4digits: 35° .
Enables/Disables transmission of the speed and course data.
M
ODE
35°38.17'
FTM-350 S APRS ® M
ERIES ANUAL