Yaesu FTM-350 Series Manual page 32

APRS/PKT S
E24: DIGI PATH FULL 1
Function:
Program the address information (callsign or alias etc) of the digipeater that you selected as
"FULL 1" in Set Mode item "E19 DIGI PATH SELECT".
E25: DIGI PATH FULL 2
Function:
Program the address information (callsign or alias etc) of the digipeater that you selected as
"FULL 2" in Set Mode item "E19 DIGI PATH SELECT".
E26: MESSAGE GROUP
Function:
Available Values:
E27: MESSAGE REPLY
Function:
Available Values:
Default:
STATUS:
CALLSIGN:
TEXT:
32
ET
Sets the APRS packet path.
Sets the APRS packet path.
Sets the filter type option allowing you to receive only the specified
types of APRS Group/Bulletin Message information.
1 GROUP1: ALL
2 GROUP2: CQ
3 GROUP3: QST
4 GROUP4: YAESU
5 GROUP5:
6 GROUP6:
7 BULLETN1: BLN?
8 BULLETN2: BLN?
9 BULLETN3: BLN?
Enable/Disable the automatic message reply feature, and program its
details.
1 STATUS: OFF or ON
2 CALLSIGN:  - 
3 TEXT:
1 STATUS: OFF
2 CALLSIGN:  - 
3 TEXT:
When this item is set to "ON", the FTM-350 transmits the reply mes-
sage (determined from the TEXT item) automatically when an APRS
message is received.
Program the callsign here when you wish to reply to a specific station
only.
Enter the reply message.
M
ODE
FTM-350 S APRS ® M
ERIES ANUAL