Yaesu FTM-350 Series Manual page 14

R
ECEIVING AN
M G
ESSAGE ROUP
The Message group option allows you to choose to receive only specific types of message
information.
1. Press the [ SET ] key to enter the Set Mode.
2. Rotate the left side [ DIAL ] knob to select "APRS/PKT" group, then press the left side
[ DIAL ] knob.
3. Rotate the left side [ DIAL ] knob to select Set Mode item "E26 MESSAGE GROUP",
then press the left side [ DIAL ] knob to enable modification of this Set Mode item.
4. Rotate the left side [ DIAL ] knob to select the "group" you wish to utilize (GROUP1:
ALL, GROUP2: CQ, GROUP3: QST, or GROUP4: YAESU).
5. If you add a new message group code and/or bulletin group code, select "GROUP5",
"GROUP6" (for message group code) or "BULLETN1" ~ "BULLETN3" (for bulle-
tin group code) by rotating the left side [ DIAL ] knob, then press the left side [ DIAL ]
knob.

6. Use the [ ] / [
select the desired characters/numbers in each column.
7. Repeat for each column to complete the message (up to 9 characters) or bulletin (up to
5 characters).
8. When you have completed your selection, press the [ ENT ] key to save the new setting,
then press the [ ESC ] key several times to exit from Set Mode.
The FTM-350 provides many convenient functions for APRS operation. Refer to the "APRS/
PKT Set Mode" chapter beginning on page 20 for details.
14
APRS
S
ETTING

] key to navigate to each column, the use the left side [ DIAL ] knob to
M
®
ESSAGE
FTM-350 S
ERIES
APRS ® M
ANUAL