Yaesu FTM-350 Series Manual page 33

E28: MY CALLSIGN
Function:
E29: MY POSITION SET
Function:
Available Values:
Default:
GPS:
MANUAL:
P.LIST:
E30: MY POSITION
Function:
See page 2 for details.
E31: MY SYMBOL
Function:
Available Values:
Default:
You may replace the default icon of the ICON1, ICON2, and ICON3 to another one by
rotating the left side [ DIAL ] knob.
If you wish to change the USER icon, press the left side [ DIAL ] knob, then rotate the left
side [ DIAL ] knob to select the desired Symbol Table ID (left digits in the parenthesis), then
press the left side [ DIAL ] knob and rotate the left side [ DIAL ] knob to select the desired
Symbol Code (right digits in the parenthesis).
E32: POSITION COMMENT
Function:
Available Values:
Default:
Important Note: Only set this item to "EMERGENCY" when urgent help is needed, such
as an accident or a disaster.
FTM-350 S
ERIES
APRS/PKT S
Program your callsign. See page 2 for details.
Determine your location (Longitude/Latitude).
GPS, MANUAL, or P.LIST GRP1-POINT1 ~ P.LIST GRP4-POINT4
GPS
Your location is determined by the optional GPS Unit. When the op-
tional GPS Unit is connected to the transceiver, select this item.
Your location is determined by Set Mode item "E30 MY POSITION".
Your location is determined from the "Point" list memory data. See
page 25 of the FTM-350 Operating manual for details.
Program your location (Longitude/Latitude) manually.
Select the icon, which will be displayed to identify your station on the
monitors of other stations.
ICON1, ICON2, ICON3 (46 symbols each), and USER (free select
charactor)
ICON1: , ICON2:
Selects position comment depending on your situation.
Off Duty, En Route, In Service, Returning, Committed, Special, Pri-
ority, Custom 0 ~ Custom 6, EMERGENCY!
Off Duty
APRS ® M
ANUAL
, ICON3: , USER:
M
ET ODE
33