List Ip Networks; List Ip Routes; List Ipx Networks; List Ipx Routes - 3Com OfficeConnect Remote 812 Cli User's Manual

B-18 A B: CLI COMMAND DESCRIPTION
PPENDIX

list ip networks

list ip routes

list ipx networks

list ipx routes

list ipx services

Displays all the IP networks you previously defined using the add ip network
command. It also lists:
Name - network designation


Prot - always the IP protocol


Int - name of the interface this network runs on


State - state of the network; ENABLED or DISABLED


Type - STATIC or DYNAMIC network


Network Address - address of the IP network


Displays all the statically defined IP routes that you previously defined using the
add ip route command. It lists:
Destination - IP address that the route resolves to


Prot - LOCAL or RIP


NextHop - address of the gateway used to reach this route


Metric - number of router hops away this route is from the system


If - interface that the route uses


Displays the IPX networks that you previously defined using the add ipx network
command. It lists:
Name - designation you assigned this network


Prot - protocol; always IPX


Int - interface each IPX network runs on


State - ENABLED or DISABLED


Type - STATIC or DYNAMIC


Network Address - network address of this IPX network


Displays the IPX routes that you previously defined using the add ipx route
command, plus the defined IPX nodes. It lists:
Network Addr - network address of this route


Prot - protocol used to find this route: LOCAL, RIP, STATIC, NLSP, OTHER


NextHopNIC - network address of the next router (the next hop to the


destination), or the MAC address for the local IPX nodes (on the LAN)
Gateway - address of the gateway to this network


Metric Ticks - number of hops through routers this network is distant from


Displays IPX services. It lists:
Name - name of the IPX service


NetNum - network number that the service is on


Node - name of the IPX node running the service


Socket Type - socket number of the service