Ipx Source And Destination Network Filtering Using Cli; Ipx Source And Destination Host Filtering Using Cli; Ipx Source And Destination Socket Number Filtering Using Cli; Ipx Rip Packet Filtering Using Cli - 3Com OfficeConnect Remote 812 Cli User's Manual

Release 1.0
Hide thumbs Also See for OfficeConnect Remote 812:
Table of Contents

Advertisement

Creating Filters Using Command Line Interface
6-33

IPX Source and Destination Network Filtering Using CLI

IPX network numbers must be specified as an network number no greater than
8-digits in hexadecimal format. The following rule example rejects IPX packets
with a source address: 00-03-42-BF.
IPX:
1 REJECT src-net = 00-03-42-BF;

IPX Source and Destination Host Filtering Using CLI

Host addresses must consist of the 8-digit network number, followed by the four
digit node number in hexadecimal format.
The following rule example accepts IPX packets with a destination address of
04-0B-43-AA:
IPX:
1 ACCEPT dest-host = 04-0B-43-AA;
999 DENY;

IPX Source and Destination Socket Number Filtering Using CLI

Sockets numbers represent communications interfaces that let an application
access a network protocol by opening a socket and declaring a destination.
Sockets are useful because they provide a simple way to direct an application onto
the network.
You can compare the source or destination IPX socket number contained in the
packet to the socket number defined in the filter rules. You must specify the type
of the comparison.
For example, the following rule example accepts IPX packets with the IPX source
socket number 0x001:
IPX:
1 ACCEPT src-socket = 0x001;
999 DENY;

IPX RIP Packet Filtering Using CLI

Routing Information Protocol (RIP) packets are used to identify all attached
networks as well as the number of router hops required to reach them. The
responses are used to update a router's routing table.
You define IPX RIP packet filtering rules in the IPX-RIP protocol section of the filter
file. You can filter IPX RIP packets by network only.
The following rule example filters the route specified by the IPX network address
00-03-55-BF:
IPX-RIP:
1 REJECT network = 00-03-55-BF;

Advertisement

Table of Contents
loading

Table of Contents