Set Dhcp Server; Set Dns - 3Com OfficeConnect Remote 812 Cli User's Manual

B-24 A B: CLI COMMAND DESCRIPTION
PPENDIX

set dhcp server

set dns

max_hops <number>


Defines the address and characteristics of the secondary DHCP Server over the
WAN that should receive our relayed DHCP requests.
Parameters Description
address IP address of the secondary DHCP server over the WAN port where DHCP
resolution requests should be forwarded.
enabled Whether or not this server is active for relay.
max_hops maximum number of hops the redirected requests are allowed to accrue
without the request being dropped.
DNS1 <IP_address>


DNS2 <IP_address>


domain <string>


end_address <IP_address >


hostname <string>


lease <seconds>


mask <IP_address>


router <IP_address>


start_address <IP_address>


WINS1 <IP_address>


WINS2 <IP_address>


Defines the characteristics of the DHCP Server and defines the pool of addresses
that this facility should administer.
Parameters Description
DNS1 IP address of the primary DNS server that the DHCP server will utilize when
resolving names.
DNS2 IP address of the secondary DNS server that the DHCP server will utilize when
resolving names.
domain Name of the DNS domain we exist in.
end_address Last IP address in the pool of IP addresses that will be handed out through
DHCP.
hostname DNS hostname of this unit.
lease The number of seconds that an IP address will be allocated to a workstation
without having to be renewed.
mask IP network mask that applies to the pool of IP addresses being administered.
router IP address that the workstations should use as their default gateway.
start_address First IP address in the pool of IP addresses that will be handed out through
DHCP.
WINS1 IP address of the primary WINS server that the DHCP server will utilize.
WINS2 IP address of the secondary WINS server that the DHCP server will utilize.
cache_size <number>