Set Date <Date; Set Dhcp Mode <Mode; Set Dhcp Relay Server1; Set Dhcp Relay Server2 - 3Com OfficeConnect Remote 812 Cli User's Manual

set date <date>
set dhcp mode <mode>

set dhcp relay server1

set dhcp relay server2

idle timout <minutes>


local_prompt <string>


prompt <string>


Sets console parameters for CLI commands.
Parameters
history
<numerical range>
prompt <string>
local_prompt <string>
login_required
[YES | NO]
password <alphanumeric
string>
Sets the system date, and leaves the time unchanged. Use show date to see what
the current settings are. The format is: dd-mmm-yyyy. The month should be the
first three characters of the month name. The year can be either 2 or 4 digits - 97
or 1997.
Sets the DHCP mode for the unit.
Parameters Description
mode DHCP functionality you wish to enable for this unit. Currently available
services are:
DISABLED - disables all DHCP services.
RELAY - enables the DHCP Relay service.
SERVER - enables the DHCP Server within the unit.
address <IP_address>


enabled [YES | NO]


max_hops <number>


Defines the address and characteristics of the primary DHCP Server over the WAN
that should receive our relayed DHCP requests.
Parameters Description
address IP address of the primary DHCP server over the WAN port where DHCP
resolution requests should be forwarded.
enabled Whether or not this server is active for relay.
max_hops maximum number of hops the redirected requests are allowed to accrue
without the request being dropped.
address <IP_address>


enabled [YES | NO]


Description
Sets the depth of the buffer holding the command history. Use the
history command to see the current depth and a list of your last CLI
commands. The default is 10 commands. The range is 1-500.
Sets the global command prompt for the CLI. Use show command
to see the currently defined prompt. Limit: 64 characters.
Sets a separate prompt for a command file process. Limit: 64
characters.
Set to YES if CLI console passwording is enabled.
The CLI password, up to 8 characters
CLI Commands B-23