Telnet Information; Quick Setup Ip Information - 3Com OfficeConnect Remote 812 Cli User's Manual

Along with a community name, you can limit access to a specific management
station. "0.0.0.0" means any station.
Question
What is the IP address of the station for this
community?
You also need to specify if this community can only read information, or read and
write information.
Question
Can this community change management
information?
This completes the section on SNMP management configuration.

TELNET information

Question
Do you want to allow command line management via
TELNET?
For TELNET management of the system, you need to create a user name and
password to control access.
Question
What user name will be allowed to manage this system?
What password will be used for this user ?

Quick Setup IP information

The OfficeConnect Remote 812 uses a network name to identify the network for
future managment commands.
Question
Enter the network name of your IP network:
Enter the IP address for the OfficeConnect Remote
812:
The IP mask can be specified either as a class ("A", "B", or "C"), the number of
one bits in the mask, or as an address in the format 255.x.x.x.
CLI Quick Setup Script
Default Your System
[0.0.0.0]
Default Your System
[yes]
Default Your System
[yes]
Default Your System
[root]
[ ]
Default Your System
[ip]
[192.168.200.25
4]
4-3