Oki OKIFAX 5750 Maintenance Manual page 873

7: POP PASSWORD
The password registered on the POP3 server may be entered, which must be
alphanumerical characters no more than 16 characters long. If a password has already
been registered, it will be shown as 16 Xs to ensure that it will remain protected.
Note: You can input Latin letters, numbers and symbols using one-touch keys. To enter
symbols, use either one-touch key 20 or ten key "0". The symbols that can be
used are: ! # & ' ( ) * + , - . / : ; = ? • @ ? " _ % ~
The "~" (tilde) symbol will appear on the LCD as "-1". Both upper-case and lower-
case letters can be used; to switch between the cases, press one-touch key 31
(CAPS key).
8: DNS P .SRV ADDRESS (Domain Name Service Primary Server)
Sets the IP address of the DNS primary server.
This will not be required if the server is connected directly using its IP address.
9: DNS S .SRV ADDRESS (Domain Name Service Secondary Server)
Sets the IP address of the DNS secondary server.
Enter this setting only if a secondary server has been set up.
10: HOST NAME
Enter the host name defined on this machine. Maximum length: 64 characters.
Note: You can input Latin letters, numbers and symbols using one-touch keys. To enter
symbols, use either one-touch key 20 or ten key "0". The symbols that can be
used are: ! # & ' ( ) * + , - . / : ; = ? • @ ? " _ % ~
The "~" (tilde) symbol will appear on the LCD as "-1". Both upper-case and lower-
case letters can be used; to switch between the cases, press one-touch key 31
(CAPS key).
11: FAX Email Address
Enter the email address defined on this machine. Maximum length: 64 characters.
Note: You can input Latin letters, numbers and symbols using one-touch keys. To enter
symbols, use either one-touch key 20 or ten key "0". The symbols that can be
used are: ! # & ' ( ) * + , - . / : ; = ? • @ ? " _ % ~
The "~" (tilde) symbol will appear on the LCD as "-1". Both upper-case and lower-
case letters can be used; to switch between the cases, press one-touch key 31
(CAPS key).
12: DSN (Delivery Status Notification)
If a mail server that has a DSN function receives a message, it will send a delivery
confirmation to the sender of the message. If the mail server to which you are going to
send a message does not support DSN, it will be advisable to change this setting to OFF
as the server may not be able to handle the message correctly and cause a communica-
tion error. Some servers can send mail to mail servers which does not have the DSN
function, and no delivery notification will be sent in this case.
In order for this machine to receive a delivery notification, the TEXT PRINT setting must
be turned on.
Note: When a message is sent with this setting ON, the recipient of the transmission
returns MDN; to print it, you must turn the TEXT PRINT setting ON.
13: NIC INITIALIZE
Initialises the Network Card back to its original factory settings.
[Important!] No warning message will be given if this option is selected. Please check
41285901TH Rev.3
carefully before carrying out this operation.
873 /