No.
Item
4
Forwarding No.
5
Forwarding On P-ERR.
6
Relay Report No.
41285901TH Rev.3
Table 2.9.4.1 Location Program (4/5)
Specify the destination of forwarding for incoming call.
When the transfer destination telephone number is set, FWD
can be specified in the AUTO ANSWER mode.
1) Number of forwarding for incoming call destination that can
be specified
OKIFAX5750/5950: 1
2) Number of characters used to specify a destination
40 characters (ten-keys 0-9/*/#/PAUSE/HYPHEN/SPACE/+)
* The HYPHEN key is prohibited when country code is set to
FRE.
This will be the object of collection of closed network service.
Specify the destination of forwarding for no toner/no paper
reception.
When the transfer destination telephone number is set, forward-
ing can be transmitted to the specified destination at the time of
message in memory for no toner/no paper condition.
1) Number of forwarding for no toner/no paper reception
destination that can be specified
FX-056/FX-176: 1
2) Number of characters used to specify a destination
40 characters (ten-keys 0-9/*/#/PAUSE/HYPHEN/SPACE/+)
* The HYPHEN key is prohibited when country code is set to
FRE.
This will be the object of collection of closed network service.
Specify the destination of a relay report for relay broadcast
initiate transmission.
When this destination is specified, a relay report is transmitted
to the specified destination upon the relay broadcast initiate
transmission.
1) Number of characters used to specify a destination
40 characters (ten-keys 0-9/*/#/PAUSE/HYPHEN/SPACE/+)
* The HYPHEN key is prohibited when country code is set to
FRE.
Specifications
169 /