Oki OKIFAX 5750 Maintenance Manual page 217

Setting values are defined for each default type.
For more details, see Section 2.9.6, "Defaults."
The setting data must be transferred to the G3 Option side.
No. Item
70 MCF. (Single-Loc.)
71 MCF. (Multi-Loc.)
72 Image in MCF.
73 Err. Report (MCF.)
41285901TH Rev.3
Table 2.9.5.6 Report Options
Determine whether a single location transmission result report
is to be output automatically.
1) Setting values
ON (Report is output automatically)/OFF (Report is not
output automatically)
Determine whether a multi-location transmission result report is
to be output automatically.
1) Setting values
ON (Report is output automatically)/OFF (Report is not
output automatically)
Determine whether an image is to be added to the message
confirmation result report.
1) Setting values
ON (Image is added)/OFF (Image is not added)
Determine whether an error report is to be output automatically
when communication does not end with S.C 0000 (service
code: 0000).
1) Setting values
ON (Report is output automatically)/OFF (Report is not
output automatically)
Specifications
217 /