B.2 Description of Print Operations
B.2.1 Process Operations
1) Hopping and feeding
Hopping and feeding are affected by a single resist motor in the mechanism shown
below.
Motor
gear
Turning the resist motor in the "a" direction drives the hopping roller. Turning the resist
motor in the "b" direction drives the resist roller. The resist gear and hopping gear contain
one-way clutch, so that turning each of these gears in reverse direction will not be trans-
mitted to the corresponding roller.
41285901TH Rev.3
Resist motor
a
b
Resist gear
Idle gear
Resist roller
Hopping gear
Hopping roller
506 /