Oki OKIFAX 5750 Maintenance Manual page 146

No. Item
05 TSI Print
06 TAD Mode
41285901TH Rev.3
Table 2.9.2.3 Technical Functions: Setup (2/11)
Determine whether a TSI is to be printed in the received image.
1) Setting value
ON (Printed)/OFF (Not printed)
* When this setting is ON and TIME/DATE PRINT is set to
ALL , a TSI is printed on all received pages. In other cases,
a TSI is printed on the first page only.
* When a TSI has not been registered but a personal ID has
been registered, the personal ID is printed.
Switches between TAD modes.
This setting is required to determine whether TAD is to be
selected in the AUTO ANSWER mode and set the fax operation
to be performed after completion of TAD-side operation (re-
sponse).
In the TAD mode, a message is recorded in the telephone
memory if the telephone (connected externally) answers auto-
matically when the facsimile is ready for reception. After
completion of message recording, the line is switched to the
facsimile.
If CNG is detected while the telephone is answering automati-
cally, reception starts immediately.
1) Setting values
OFF/TYPE1/TYPE2/TYPE3 selectable
* Relationships between settings and operations are as
follows:
OFF: TAD cannot be selected in the AUTO ANSWER
mode.
TYPE1: When TAD operation ends without detecting
CNG, the line is switched to the facsimile starting
reception immediately.
TYPE2: After completion of TAD operation, the machine
returns to the standby state.
TYPE3: The machine starts detecting CNG 15 seconds
after the telephone starts the auto answering
operation.
If TAD operation ends without detecting CNG, the machine
returns to the standby state.
* When this setting is set to OFF in the TAD mode, the FAX
mode will be selected automatically.
Specifications
146 /