G3 Protocol Dump; Difference From Okifax5700/5900 - Oki OKIFAX 5750 Maintenance Manual

1.6.7 G3 Protocol Dump

Purpose:
To allow the serviceman to obtain a list of protocol signals transferred between the transmitter
and receiver.
Method:
The report will be manually printed out for maintenance purpose. If the previous communica-
tion is G3, G3 communication protocol dump is printed out. If it is G4, the G4 communication
protocol dump is printed.
1. Title of the report
2. Date and time when the report was printed
3. Sender ID
4. Date of communication
5. Time of communication
6. One message transmission/reception time
7. Identification of remote station
8. Mode of transmission/reception according to ITU-T designation
9. Total number of pages in communication
10. Identification of the result of the communication
11. Service code
12. TX: DIS/DTC/DCS/NSF/NSS/NSC
13. Transmitted telephone number
14. Transmitted SEP/SUB
15. Transmitted SID
16. Common information of ITU-T V.34 TX/RX
17. Modem trace
18. RX: DIS/DTC/DCS/NSF/NSS/NSC (page2)
19. Received telephone number (page2)
20. Received SEP/SUB (page2)
21. Received SID
22. Common information of ITU-T V.34 TX/RX (page2)
23. Modem trace (page2)
1.6.7.1

Difference from OKIFAX5700/5900

(1) When G3 option is installed, manually output protocol dump (4 sheets) of the main line
communication and optional line communication.
(2) If communication error or page re-transmission occurs (that is same as the error MCF
output condition), automatically output erroneous communication protocol dump (by
hidden setting ON-OFF).
(3) Add or change the following descriptive formats:
Change Transmitted-DIS from 13 bytes to 20 bytes of descriptions
Change Transmitted-DTC from 13 bytes to 20 bytes of descriptions
Change Transmitted-DCS from 13 bytes to 20 bytes of descriptions
Change Transmitted-NSF from 60 bytes to 100 bytes of descriptions
Change Transmitted-NSC from 60 bytes to 100 bytes of descriptions
Add Transmitted-SID frame descriptions (23 bytes).
Change Received-NSF from 70 bytes to 100 bytes of description
Change Received-NSC from 70 bytes to 100 bytes of description
Add Received-SID frame descriptions (23 bytes)
Describe "#" symbol to the descriptions of information on the result of communication for
communication using G3 option. (see 1.6.11 "Activity Report")
41285901TH Rev.3
* CSI and/or telephone number
63 /