Oki OKIFAX 5750 Maintenance Manual page 770

2.4 Running RMCS
Return to drive C and to execute RMCS:
C>RMCS
The operator is then required to enter their ID and password. The ID is not critical to the
operation and is only used for the operation history. The password must be the same as
entered during Installation of RMCS set-up.
The TEL DIRECTORY MENU is now displayed and the main options are Select User and
Register user.
Note: The user must be registered before being selected.
2.4.1 Registering user
Select 2 (Register user) from the menu and select NEW USER which is in inverse video.
Press enter and the user has to supply the following details.
<USER ID>
<TEL NUMBER>
<FAX MODEL>
<MEMO>
Press function key F10 to register these details.
The FAX DATA FILE LIST is now displayed and the file name 'sys_defx.9xx' should be high-
lighted, press enter to complete registration (This file name is part of the FAX DISC information
and 9xx is dependent on the model number).
2.4.2 Selecting a user
Select 1 (Select user) from the menu and USER LIST will be displayed. Use the arrow keys to
select the required user then press enter.
The MAIN MENU will now be displayed:
1: Initialization of FAX
2: File [LOAD] (Center to FAX)
3: File [SAVE]
4: [EDIT]
5: File [EDIT]
6: Testing
7: Environment setting
8: Terminate
At first it is necessary to select 'Modem settings' in 'Environment Setting' to set COMMUNICA-
TION PORT connected between PC and FAX Modem, and to set FAX Modem parameters
(TONE DIAL/PULSE DIAL, DETECT BUSY TONE, DETECT DIAL TONE, SPEAKER MODE,
SPEAKER VOLUME, FLOW CONTROL COMMAND).
41285901TH Rev.3
enter
the name of the REMOTE fax
the telephone number of the REMOTE fax
fax model of REMOTE fax (FX-056/176)
Press the space bar to select the model
Not required, but a message can be entered
(Center from FAX)
(ON LINE)
(OFF LINE)
770 /