Oki OKIFAX 5750 Maintenance Manual page 152

No. Item
27 Media Type
28 TR (transfer roller)
Latch Current
29 V34 TX Retry
30 Symbol Ratre
31 NSF Switch
32 ID/TSI Priority
41285901TH Rev.3
Table 2.9.2.3 Technical Functions: Setup (8/11)
Set the recording paper quality (thickness).
1) Setting values
M (Medium)/MH (Thicker than medium)/H (Thick)
Set an imprinting latch current value.
1) Setting values
-2/-1/0/+1/+2
Determine whether the V34 communication error is to be
remembered.
1) Setting values
ON (Remembered)/OFF (Nor remembered)
Set the V.34 modem symbol rate.
1) Setting values
2400/2800/3200/3429
Determine whether the NSS/NSF signal is to be sent.
1) Setting values
ON (sent)/OFF (Not sent)
* If data is transmitted with this setting OFF, DCS transmis-
sion is performed (NSC is not sent) even if the Oki NSF is
received.
* If REMOTE DIAGNOSIS is set to ON although NSF Switch
(this setting) is set to OFF, an NSF is sent and sent immedi-
ately if Oki's original function is ON (confidential, etc.).
Determines whether the personal ID or TSI is given priority
during LCD display and printing.
1) Setting values
ID (Personal ID is given priority)/TSI (TSI is given priority)
ID/TSI PRIORITY=ID
Priority
1 (High) Personal ID Personal ID
2
3 Calling ID
4 (Low) Calling No. (Calling No.)
Specifications
LCD display during
communication
Description in
Activity report
TX RX
CSI TSI Calling No. (Calling No.)
(Calling ID) (Personal ID) Personal ID
* Shaded combinations do not exist actually.
ID/TSI PRIORITY=TSI
LCD display during
communication
Description in
Activity report
TX RX
CSI TSI
– –
152 /