Engineering Mode - Vision Fitness X20 Owner's Manual

ENGINEERING MODE

Engineering mode consists of 13 optional settings. Use the engineering
mode to enable certain features or displays on your console.
ENTERING AND USING ENGINEERING MODE
• Press and hold the UP s and DOWN t keys for approximately three
seconds.
• The console will beep and display engineering modes and optional
settings. Use the UP s or DOWN t keys to scroll through the options.
Press the ENTER key to select the appropriate mode or setting.
OPTIONAL SETTINGS
S E T T I N G D E S C R I P T I O N
P1 – SET MAX TIME ALLOWS YOU TO SET THE MAXIMUM TIME A PROGRAM CAN RUN FOR.
P2 – SET USER TIME ALLOWS YOU TO SET THE TIME THAT THE COMPUTER WILL DEFAULT TO FOR ALL PROGRAMS.
ALLOWS YOU TO SET THE AGE THAT THE COMPUTER WILL DEFAULT TO DURING SETUP.
P3 – SET USER AGE
P4 – SET WEIGHT ALLOWS YOU TO SET THE WEIGHT THAT THE COMPUTER WILL DEFAULT TO DURING SETUP.
P5 – DEFAULT ALLOWS YOU TO SET THE RESISTANCE LEVEL THAT THE COMPUTER WILL DEFAULT TO
RESISTANCE LEVEL FOR ALL PROGRAMS.
P6 – DEFAULT LANGUAGE ALLOWS YOU TO CHOOSE, FROM THE AVAILABLE LANGUAGES, WHAT LANGAUGE TEXT
WILL BE DISPLAYED IN.
P7 – UNIT ALLOWS YOU TO SET EXERCISE FEEDBACK TO ENGLISH (MILES) OR METRIC (KILOMETERS)
SYSTEM.
P8 – MACHINE TYPE ALLOWS YOU TO SET YOUR CONSOLE TO BIKE MODE OR ELLIPTICAL MODE.
P9 – ACCUMULATED DATA ALLOWS YOU TO VIEW THE TOTAL TIME IN HOURS AND TOTAL DISTANCE IN MILES OR
KILOMETERS ACCUMULATED ON YOUR PRODUCT.
P10 – DISPLAY TEST TEST USED BY SERVICE TECHNICIANS TO TEST LCD DISPLAYS.
P11 – HARDWARE TEST TEST USED BY SERVICE TECHNICIANS TO TEST EDDIE CURRENT BRAKE SYSTEM.
44
P12 – BEEPER MODE ALLOWS YOU TO TURN THE BEEPER ON OR OFF.
P13 – VERSION ALLOWS SERVICE TECHNICIANS TO VIEW SOFTWARE VERSION USED BY CONSOLE.
• Use the UP s and DOWN t keys within each setting to change the setting.
• Press the ENTER key to save settings.
• To EXIT engineering mode, press and hold the START key for three seconds.
45 45