Power Supply - Vision Fitness X20 Owner's Manual

ASSEMBLY
It is recommended, when possible, that an authorized VISION FITNESS
retailer assemble your Elliptical Trainer. If you have elected to assemble
this product yourself, for your safety, please read and follow each of the
steps in the enclosed assembly instructions. If you have any questions
regarding any component or function of your Elliptical Trainer, contact
your retailer.
MOVING
Your VISION FITNESS Elliptical Trainer has transport wheels included
for ease of mobility. To move, firmly grasp the guide rails at rear of the
machine. Slowly lift the machine and roll on the front transport wheels.
CAUTION
: Our Elliptical Trainers are well built and heavy, weighing up to
200 pounds. Use care and additional help if necessary.
6
PLACEMENT IN YOUR HOME
Please follow the safety instructions to place the Elliptical Trainer in the
location where it will best be used. It is important that you place your
Elliptical Trainer in a comfortable and inviting room. Avoid putting your
Elliptical Trainer in an unfinished basement or undesirable setting. Exercise
adherence will be achieved only if you exercise in an attractive setting.
STABILIZING THE ELLIPTICAL TRAINER
After positioning the Elliptical Trainer
in its intended location, check its
stability by attempting to rock it side to
side. Excessive rocking or wobbling
indicates that your Elliptical Trainer
needs to be leveled. Your Elliptical
Trainer has levelers located under
the guide rails and under the side
stabilizers. Determine which leveler
is not resting completely on the floor.
Loosen the wing nut to the base of
the leveler to allow the leveler to
rotate. Now rotate the leveler to the
left or right until the Elliptical Trainer
is stable. Lock the adjustment by
tightening the wing nut against the
stabilizer or guide rail.

POWER SUPPLY

Your Elliptical Trainer uses a wall mount external power supply. Use only
the power supply provided with your Elliptical Trainer. If you misplace this
power supply, please contact your authorized VISION FITNESS retailer
for an original replacement. Use of the wrong power supply may cause
damage to your Elliptical Trainer.
7