Answering System; Answering System Settings; Announcement - AT&T BL103-1K Complete User's Manual

Answering system

Answering system settings

Use the answering system menu of a handset to set up the announcement
message, turn on or off the answering system or message alert tone, activate
call screening, or change the number of rings, remote access code or message
recording time.

Announcement

Your outgoing announcement plays when calls are answered
by the answering system.
The telephone has a default outgoing announcement, "Hello,
please leave a message after the tone." You can use this
announcement, or record your own.
To record a new outgoing announcement:
MENU/
1. Press
2. Press or
CID
/SELECT
MENU
/SELECT
3. Press
MENU
4. The handset displays Play [2] Del [3] Rec [7] and it
announces, "To play, press 2. To record, press 7." Press 7 to
record. The handset announces, "Record after the tone.
Press 5 when you are done."
- OR -
/SELECT to select Record annc using the
Press
MENU
telephone base. The system announces, "Record after the
tone. Press 5 when you are done."
5. After the tone, speak towards the handset or telephone
base microphone. Press 5 to end recording. The newly recorded
announcement automatically plays.
To listen to the recorded announcement again on the handset, wait after
playback has completed, then press 2.
To listen to the recorded announcement again on the telephone base, scroll to
Play annc and press
in idle mode.
SELECT
to scroll to Answering sys, then press
DIR
.
to select Announcement.
/SELECT.
MENU
123
Answering sys
ECO
Announcement
ECO
Play Del Rec
[2] [3] [7]
ECO
Recording... Stop
[5]
ECO