Answering System; Answering System Settings; Announcement - AT&T DAL75121 Complete User's Manual

Answering system

Answering system settings

Use the answering system menu of a handset to set up the announcement
message, turn on or off the answering system or message alert tone, activate
call screening, or change the number of rings, remote access code or message
recording time.

Announcement

Your outgoing announcement plays when calls are answered
by the answering system.
The telephone has a default outgoing announcement, "Hello,
please leave a message after the tone." You can use this
announcement, or record your own.
To record a new outgoing announcement:
MENU/
1. Press
2. Press CID or
/SELECT
MENU
3. Press /SELECT
MENU
4. The screen displays Play [2] Del [3] Rec [7] and it
announces, "To play, press 2. To record, press 7." Press 7 to
record. The handset announces, "Record after the tone.
Press 5 when you are done."
5. After the tone, speak towards the handset microphone.
Press 5 to end recording. The newly recorded
announcement automatically plays.
To listen to the recorded announcement again, wait after
playback has completed, then press 2.
in idle mode.
SELECT
to scroll to Answering sys, then press
.
to select Announcement.
104
Answering sys
ECO
Announcement
ECO
Play Del Rec
[2] [3] [7]
ECO
Recording... Stop
[5]
ECO