About This Manual - Milnor 30022H7x Service

ABOUT THIS MANUAL

Scope
—This instruction manual is intended to provide preventive maintenance procedures, service proce-
dures, and mechanical parts identification for Milnor
extractors. Measurements are in commonly used US and metric units unless otherwise noted.
See the appropriate programming and operating manual for information on the control system. See the
schematic manual for electrical parts identification and electrical troubleshooting.
Manual Number/Date Code (When To Discard or Save)
is located on the inside front cover, upper right corner just above the manual name. Whenever the manual is
reprinted with new information, part of this number changes. If the date code after the "/" changes, the new
version applies to all machines covered by the old version, but is improved— thus the old version can
be discarded. If the manual number before the "/" changes, the new manual covers only new machines.
Example: Discard MATMODELAE/8739
ments). Also, discard MATMODELAE/87
provements). But keep MATMODEL
new manual no longer applies to machines originally shipped with the old manual.
Documents and Change Bars
revision criteria as the manual. Text documents also display change bars. Example: When section
B
MSOP0599AE/9135 V becomes MSOP0599AE/9135
changes for this revision. For a major rewrite (e.g., MSOP0599AE/92
For Assistance
—Please call:
Pellerin Milnor Corporation
Attn: Service Department
P. O. Box 400
Kenner, LA 70063-0400
Trademarks of Pellerin Milnor Corporation
this publication, are trademarks of Pellerin Milnor Corporation:
®
Ampsaver CBW
®
Autolint Dye-Extractor
®
Auto-Purge Dyextractor
Autovac E-P Plus
C
V when MATMODELAE/8739
39D
V when MATMODELAE/87
A
E/8746FV when MATMODEL
—The individual documents comprising this manual use the same
Phone: (504) 467-9591
Fax: (504) 467-9777
®
Gear Guardian
®
Hands-Off
®
Hydro-Cushion
®
Mildata
1
MHP30H7JAE/2000266V (1 of 1)
®
30022H7x and 30022H8x model rigid mount washer-
—The manual number/date code
D
B
E/8815AV is received, since the
C
V, change bars with the letter "C" appear next to all
26A
V), all change bars are deleted.
—The following, some of which may be used in
®
Milnet
®
Milnor
®
Miltrac
®
Miltron
V is received (minor improve-
46A
V is received (major im-
®
Staph-Guard
®
System 4
System 7
®
Totaltrol
®
®
®