Table of Contents
Advertisement
Installation Considerations
1. The standard hardware included with the microphone is intended to be clipped to ceiling
tracks with the standard inverted "T" shaped cross-section, and with the horizontal part
of that "T" to be either 9/16" (14 mm) or 15/16" (24 mm) in width. Ceilings which are
not of this design need to have a secure anchoring installed in the ceiling to hang the
microphone.
The standard cable included with the microphone is 47 feet (14 meters) long and plenum
2.
rated to comply with fire code regulations. This allows the microphone to be mounted
up to about 30 "ceiling feet" (9 meters) away from the system. If the microphone is
mounted further away, additional cable needs to be ordered. This cable is available in
several standard lengths and can be ordered from your local TANDBERG
Representative.
3. The microphone assembly has a pickup range of about 14 feet (5 meters). This means
that all seating positions should be within this range of the microphone capsule. If there
are substantial numbers of desired seating positions outside this area, then additional
microphones may need to be installed.
4. The microphone cable should be routed from the microphone on the ceiling to the
system on the floor in an aesthetic manner, such as within a conduit or wall "punch-
out".
5. The AudioScience microphone is currently limited for use on the TANDBERG
Educator and other approved systems. Other applications will be documented, as they
become available.
23
23
23
23
Advertisement
Table of Contents
