Map 0131: Paper Path Sensor - IBM 4247 Maintenance Information

MAP 0131: Paper Path Sensor

Symptom Explanation
01 END OF FORMS
001 END OF FORMS
11 LOAD BIN 1, 2, or 3
011 CHECK/LOAD BIN 1, 2, or 3
031 END OF FORMS TIMEOUT
Table 9. MAP 0131: Paper Path Sensor
Step Questions/Actions
Try to load forms from the failing forms path.
1.
Does the form load, and is it visible between the
printhead and the platen?
Are you trying to load black back forms?
2.
Black back forms will not work in all forms paths, and
3.
can cause false forms path sensor errors.
Are you trying to load black back forms in the front
push, rear pull, or push-pull forms paths?
Suspected FRUs/Causes
Paper sensor failure
Logic board
Sensor cable assembly
Yes
Go to step 2.
Go to step 3.
Black back forms will not work
in the front push, rear pull, or
push-pull forms paths.
Select another forms path.
No
You are in the wrong MAP.
Return to "MAP 0100: START
OF CALL" on page 23.
Go to step 4 on page 67.
Go to step 4 on page 67.
Chapter 1. Diagnosing Problems
66