T&D Error Messages And Actions - Models 001, 002, And 003 - IBM 4247 Maintenance Information

T&D Error Messages and Actions – Models 001, 002, and 003
Table 28. T&D Error Messages and Actions
Error Message Description
ERROR RAM RAM Error
TEST
ATTACHMENT Coax card error
CARD IS NOT
COMPATIBLE
WITH PRINTER
BASE CODE
WAITING CODE Operator error
DOWNLOAD
USING PARALLEL
PORT
TD 1 FRU 5 X Microcode/Hardware
- or - Match Error
TD 1 FRU 4 X
TD 2 FRU 5 X Microcode Error
- or -
TD 2 FRU 4 X
TD 3 FRU 2 2 Microcode Error
TD 4 FRU 5 X Microcode Error
- or -
TD 4 FRU 4 X
Action
Replace the logic board. See "Logic Board - Models
001 and 002" on page 378. For Model 003, see "Logic
Board - Model 003" on page 366.
Verify that the coax card is installed with the coax base
code.
Verify that you are using the Stop and Test keys at
power on to initiate test and diagnostics
Replace the logic board. See "Logic Board - Models
001 and 002" on page 378. For Model 003, see "Logic
Board - Model 003" on page 366.
Replace the logic board. See "Logic Board - Models
001 and 002" on page 378. For Model 003, see "Logic
Board - Model 003" on page 366.
Replace the logic board. See "Logic Board - Models
001 and 002" on page 378.
Replace the logic board. See "Logic Board - Models
001 and 002" on page 378. For Model 003, see "Logic
Board - Model 003" on page 366.
231
Chapter 2. Diagnostics