IBM 4247 Maintenance Information page 424

Installation
1. Refer to Table 54 for the correct positions of the paper bail and the forms guide.
Table 54. Forms Guide and Paper Bail Positions
Selected Paper Path
Front Push
Manual Sheet Feed
Rear Push
ASF
Rear Pull
Front Push-Pull
2. Move the printhead to the far right.
3. Grasp the paper bail, as shown in Figure 158.
Important
To avoid damaging the plastic strip, ensure the plastic strip points down.
4. Insert the left and right paper bail end caps, and pivot the paper bail down into the side frames.
Forms Guide
Metal Deflector
Open
Open
Open
Open
Closed
Closed
Paper Bail
Closed
Closed
Closed
Closed
Removed
Closed
Chapter 5. Removals and Adjustments
424