Automatic Sheet Feeder Paper Path - IBM 4247 Maintenance Information

Automatic Sheet Feeder Paper Path

The next figure shows the dual push forms path along with the automatic sheet feeder (ASF). If using any of the
available forms paths along with the ASF, ensure the input and output stacks that are in the rear of the printer are
placed far enough away from the ASF bins so that the bins do not interfere with the movement of the forms.
Input
Floor
Forms Stacking With the 4247 Printer Stand
Output
Front
Input
Rear
Input
Dual Push Path
Note: If the printer is set up for dual push paths and you are using only 1 path, use the front input for the front
push, rear pull, or push-pull forms paths. Use the rear input for the rear push forms path.
Output
Input
Front
Input
Dual Push Path with ASF
Output
Rear
Input
Appendix B. Supplies, Forms, Paths, & Environmental Considerations
545