IBM 4247 Maintenance Information page 139

Table 18. Error Messages for Models 001, 002, and 003 (continued)
Message
032 FORMS JAMMED TIMEOUT
CLEAR JAM AND RELOAD FORMS
(Coax interface only)
033 TEAR PAPER TIMEOUT
TEAR OFF AT OUTPUT AND PRESS
PARK
(Coax interface only)
034 INVALID FORMS SELECT
TIMEOUT/FORMS NAME
SELECT NEW DEVICE
(Coax interface only)
(Message and form name alternate on the
first line of the display)
035 MARGIN ERROR TIMEOUT
ADJUST MARGIN OR LINE LENGTH
(Coax interface only)
036 TEAR PAPER TIMEOUT
TEAR OFF AT INPUT AND PRESS EJECT
(Coax interface only)
Description
002 FORMS JAMMED FRONT TRACTOR
or 020 FORMS JAMMED REAR
TRACTOR condition exceeded 60
seconds.
Jam detected at the front or rear tractor
jam sensor.
091 FANFOLD PARK condition exceeded
60 seconds.
014 INVALID FORMS SELECT condition
exceeded 60 seconds.
005 MARGIN ERROR condition exceeded
60 seconds.
092 FANFOLD EJECT condition exceeded
60 seconds.
Action
See "MAP 0190: Form Feed Problems" on
page 101.
1. Tear off paper after exit from the
printer.
2. Press Park to allow operation to
complete.
Perform one of the following:
v
Restart job.
v
Cancel job.
v
Select another source and restart the
job.
v
Run the job with current source.
Refer to a 4247 User's Guide for more
detail.
Press Stop, then Start. Left margin value
will be reset to 10 for current line only.
Tear off paper before entering the printer
and press Eject to allow operation to
complete.
Chapter 1. Diagnosing Problems
139