IBM 4247 Maintenance Information page 137

Table 18. Error Messages for Models 001, 002, and 003 (continued)
Message
007 INCORRECT PRINT ORDER
PRESS STOP THEN START (Coax
interface only)
008 HOLD PRINT TIMEOUT
PRESS STOP THEN START
(Coax interface only)
011 CHECK/LOAD BIN 1, 2, or 3
False message
014 INVALID FORMS SELECT/FORM
NAME
SELECT NEW DEVICE
(Message and form name alternate on the
first line of the display)
015 COMMUNICATIONS CHECK
CHECK CABLE
(Twinax interface only)
017 COMMUNICATIONS CHECK
(Twinax interface only)
Description
Invalid order received from host.
Start key not pressed within 10 minutes of
pressing Stop.
Paper begins to feed from any bin, but
stops.
Forms path sensor cannot sense paper.
Printer received a request for forms type
not supported in current forms
configuration.
No line sync detected on the twinax
interface.
Line parity error detected.
Action
Press Stop, then Start.
Press Stop, then Start.
See "MAP 0131: Paper Path Sensor" on
page 66.
Perform one of the following:
v
Restart job.
v
Cancel job.
v
Select another source and restart the
job.
v
Run the job with current source.
Refer to a 4247 User's Guide for more
detail.
Error automatically resets when line sync is
detected.
See "MAP 0121: Parallel with Twinax or
Coax Attachments, Models 001, 002, or
003" on page 41.
See "MAP 0121: Parallel with Twinax or
Coax Attachments, Models 001, 002, or
003" on page 41.
Chapter 1. Diagnosing Problems
137