Student Workbook
Native Command Line Interface
Intel
Native Command Line Interface
• Allows the user to send text-based commands to
• Terminal mode supports specific text-based
• Connect through the emergency management
®
Intel
Server Management version 5.5 includes a new remote management feature called native command line interface.
This feature allows the user to directly send text-based commands to the server's Baseboard Management Controller
(BMC) using a serial port connection. The connection requires the use of a "null modem" cable connected to Serial B
(emergency management port). Terminal mode supports standard binary IPMI 1.5 hex-ASCII commands and specific
text commands. In terminal mode the user can:
•
Power the server on or off
•
Reset the server
•
Retrieve the server's health status
•
View and configure the server boot options
•
View and configure the BMC's terminal mode configuration
•
Execute any platform-supported binary command specified in the Intelligent Platform Management Interface (IPMI)
v1.5 specification using the hex-ASCII format
© 2003 Intel Corporation
®
Server Management 5.5
the BMC
commands or IPMI version 1.5 hex-ASCII
commands
port (EMP) using null-modem cable
*Other names and brands may be claimed as the property of others.
*Other names and brands may be claimed as the property of others.
®
Intel
Server Board SE7500WV2 Training
© 2003 Intel Corporation.
93