Airport Departure Page Options - Garmin GNS 430 Pilot's Manual & Reference

{continued}
5. Rotate the small right knob (
a
the small right knob ( ) to select the desired runway. ("ALL" may appear in the runway field,
indicating the departure procedure applies to all runways. For airports with parallel runways, "B"
may appear at the end of the runway designation to indicate the departure procedure applies to
both runways.)
6. Press . The cursor moves to the transitions (TRANS) field.
E
7. Rotate the small right knob (
a
the small right knob (
8. Press . To remove the flashing cursor, press the small right knob (
E

Airport Departure Page Options

The following option is available for the airport departure page, by pressing the m
key:
Load into Active FPL? allows you to load the selected departure into the active fl ight
plan. This is identical to loading a departure procedure from the procedures page, as
described on page 66.
To load a departure procedure from the airport departure page:
1. Select the desired departure, runway and transition using the steps above.
2. Press to display the airport departure page options.
m
3. Press to select the "Load into Active FPL?" option.
E
4. The active flight plan page will appear. Press
a
) to display a window of available runways. Continue rotating
a
) to display a window of available transitions. Continue rotating
) to select the desired transition.
to return to the airport departure page.
F
r ).
WPT PAGES
Airport Departures
6
107