Garmin GNS 430 Pilot's Manual & Reference page 44

NAV PAGES
2
Map Page Options
36
To change a map setup feature:
d
1. Rotate the large right knob (
2. To change map orientation, rotate the small right knob (
d
Rotate the large right knob (
a
( ) to select the desired option . Select "North up" to fix the top of the map display to a north
heading. Select "Track up" to adjust the top of the map display to your current track heading.
Select "DTK up" to fix the top of the map display to your desired course. Press
the selected option.
3. To enable/disable automatic zoom, rotate the small right knob (
. Rotate the large right knob (
E
a
right knob ( ) to select "On" or "Off". Press
ic zoom feature will automatically adjust the map scale from 2000 nm through each lower scale,
stopping at 1.0 nm as you approach your destination waypoint.
4. To enable/disable the wind vector, all background land data or all Jeppesen aviation data, rotate
a
the small right knob ( ) to select "Map" and press
highlight the appropriate field and rotate the small right knob (
to accept the selected option.
E
5. For airports, NAVAIDs, active flight plan waypoints, user-created waypoints, state/provincial
boundaries, rivers/lakes and cities: rotate the small right knob (
"Group" name (per the chart on the previous page) and press
d
( ) to highlight the zoom field for the desired feature and rotate the small right knob (
select the maximum scale at which the feature should appear on screen. Or select "Off" to never
display the selected feature. Press
d
right knob ( ) to highlight the text field for the desired feature and rotate the small right knob
a
( ) to select the desired text size, or select "None" to disable text descriptions. Press
accept the selected option.
6. For airspace boundaries, highways, roads, railroad lines, track log data, active flight plan course
lines, and lat/long grid lines: rotate the small right knob (
name (per the chart on the previous page) and press
highlight the zoom field for the desired feature and rotate the small right knob (
maximum scale at which the feature should appear on screen. Or select "Off" to never display the
selected feature. Press E
) to highlight "Setup Map?" and press
E
a
) to select "Map" and press
) to highlight the "Orientation" field and rotate the small right knob
a
) to select "Map" and press
d
) to highlight the "Auto Zoom" field and rotate the small
to accept the selected option. The automat-
E
. Use the large right knob (
E
a
) to select "On" or "Off". Press
a
) to select the appropriate
. Use the large right knob
E
to accept the selected option. Next, rotate the large
E
a
) to select the appropriate "Group"
. Use the large right knob (
E
to accept the selected option.
.
.
E
to accept
E
d
) to
a
) to
to
E
d
) to
a
) to select the