Garmin GNS 430 Pilot's Manual & Reference page 46

NAV PAGES
2
Map Page Options
38
To change a data field:
1. Rotate the large right knob (
2. Rotate the large right knob (
3. Rotate the small right knob (
press .
E
4. Press the small right knob (
The on-screen traffic information will occupy two data fields, leaving
room to display only two additional data types. Traffic information is
only available when the GNS 430 installation includes connection to
traffic information sources. See 400 Series Pilot's Guide Addendum,
part number 190-00140-13.
Restoring Factory Settings
"Restore Defaults?" resets all four user-selectable data fi elds to their original factory
default settings.
To restore the factory default settings, rotate the large right knob (
"Restore Defaults?" (see bottom left) and press
d
) to highlight "Change Fields?" and press
d
) to highlight the data field you wish to change.
a
) to select the type of data you want to appear on this field and
r ) to remove the cursor.
E .
.
E
d
) to highlight