Garmin GNS 430 Pilot's Manual & Reference page 164

AUX PAGES
9
Setup 1
a
b
156
Setup 1 Page: Units / Mag Var
To set the magnetic variation:
1. Select "Units / Mag Var" from the setup 1 page, using the steps described on page 152.
2a. The flashing cursor highlights the heading mode field. Rotate the small right knob (
select the desired heading mode: Auto, True or User. Press
heading modes are described on page 153.)
3. If "User" is selected, the flashing cursor moves to the user value field (to the immediate right of
a
"User"). Use the small ( ) and large (
direction and value. Press
E
To change the units of measure:
1. Select "Units / Mag Var" from the setup 1 page, using the steps described on page 152.
d
2b. Rotate the large right knob (
ing categories, and corresponding units of measure, are available:
• DIS, SPD—distance and speed in Nautical (nautical miles/knots), Statute
(miles/miles per hour) or Metric (kilometers/kilometers
per hour) terms.
• ALT, VS—altitude and vertical speed in Feet/feet per minute, Meters/
meters per minute, or Meters/meters per second.
• PRESSURE—barometric pressure in Inches or Millibars.
• TEMP—temperature in degrees Celsius or Fahrenheit.
• FUEL—fuel units in Gallons, Imperial Gallons, Kilograms, Liters or
Pounds.
a
3. Rotate the small right knob (
egory. Press to accept the selection.
E
to accept the selection. (The
E
d
) right knobs to enter the desired magnetic variation
when finished.
) to highlight the desired units of measure category. The follow-
) to select the desired units of measure for the selected cat-
a
) to