Garmin GNS 430 Pilot's Manual & Reference page 148

AUX PAGES
9
Flight Planning
a
b
140
Flight Planning Page: Trip Planning
To perform trip planning operations:
1. Select "Trip Planning" from the flight planning page, using the steps described on page 136.
2. The current trip planning "leg mode" is displayed at the top of the page: "POINT TO POINT" or
"FPL LEG" (for a flight plan leg). To change the leg mode, press
window for the other leg mode, then press
3a. For point-to-point trip planning, rotate the small (
the identifier of the "from" waypoint. Once the waypoint's identifier is entered, press
accept the waypoint. The flashing cursor moves to the "to" waypoint. Again, rotate the small
a h
( ) and large ( ) right knobs to enter the identifier of the "to" waypoint and press
accept the waypoint. OR,
3b. For "flight plan leg" trip planning, rotate the small right knob (
plan (already stored in memory), by number. Rotate the large right knob (
"LEG" field and rotate the small right knob (
select "Cum" to apply trip planning calculations to the entire flight plan.
h
4. Rotate the large right knob (
a
5. Use the small ( ) and large (
finished. (Departure time may be entered in local or UTC time, depending upon unit settings.
See page 158.)
6. The flashing cursor moves to the ground speed (GS) field. Use the small (
right knobs to enter the ground speed. Press
7. With all variables entered, the following information will be provided:
• DTK— Desired track, or desired course
• DIS— Distance
• ETE— Estimated time en route
• ESA— En route safe altitude
• ETA— Estimated time of arrival
to display an options
m
to accept the other leg mode.
E
a h
) and large ( ) right knobs to enter
a
) to select the desired flight
a
) to select the desired leg of the flight plan, or
) to highlight the departure time (DEP TIME) field.
h
) right knobs to enter the departure time. Press
when finished.
E
to
E
to
E
h
) to highlight the
when
E
a h
) and large ( )