Garmin GNS 430 Pilot's Manual & Reference page 95

Flagstaff (AZ) Pulliam
ILS DME Rwy 21
DO NOT USE FOR
21" approach using the steps outlined on page 66.
3. From the transitions window, select "SHUTR" as the IAF. Also, select "Load?" (or "Activate?", if already
cleared for the approach).
4. A reminder message appears, indicating that GPS can only be used for approach monitoring. As
mentioned, you will need to use the VLOC receiver for this approach. Press ENT to acknowledge the
message.
When you "Load?" (or "Activate?") an ILS approach, the ILS frequency is automatical-
ly placed in the standby fi eld of the VLOC window. To use this frequency, simply press
V
the key to place it in the active frequency fi eld.
Selecting an ILS Approach
For this example, we'll use
a fl ight from Laughlin Bullhead
(Arizona) International to Flagstaff
Pulliam (KFLG) and select
the ILS runway 21 approach.
"SHUTR" intersection will be
selected as the IAF, which will
include an outbound leg and a
procedure turn. Of course, vec-
tors-to-fi nal could also be selected,
as previously described for the
non-precision approach examples.
1. Select Flagstaff Pulliam (KFLG) as your
destination, via the
waypoint in a flight plan.
NAVIGATION
2. Press the
P
key or as the last
D
key and select the "ILS
PROCEDURES
ILS Approach
Example
5
87