Garmin GNS 430 Pilot's Manual & Reference page 123

To modify a user waypoint by changing reference waypoint information:
1. With the user waypoint page displayed, press the small right knob (
a
2. Use the small ( ) and large (
press .
E
d
3. Rotate the large right knob (
wish to change the reference waypoint. Otherwise, continue rotating the large right knob (
to highlight the radial (RAD) or distance (DIS) field, as desired.
a
4. Use the small ( ) and large (
reference waypoint. The reference waypoint can be an airport, VOR, NDB, intersection or
another user waypoint. Press
5. The cursor moves to the radial (RAD) field. Use the small (
change the radial from the reference waypoint, if desired. Press
radial.
6. The cursor moves to the distance (DIS) field. Use the small (
to change the distance from the reference waypoint to the new user waypoint, if desired. Press
to accept the selected distance.
E
7. The cursor moves to the "Modify?" action field. Press
8. Press the small right knob ( r
If you attempt to modify or delete a waypoint which is currently a
direct-to waypoint or the current "from" or "to" waypoint in the active
flight plan, the GNS 430 will alert you with the "Can't change an active
waypoint" or "Waypoint is active and can't be deleted" message. You
must first cancel the direct-to or remove the waypoint(s) from the active
flight plan before modifying or deleting the waypoint(s).
r ) to activate the cursor.
d
) right knobs to enter the name of the desired waypoint and
) to highlight the first reference waypoint (REF WPT) field, if you
d
) right knobs to change the identifier — if desired — of the
to accept the selected identifier.
E
a
) and large (
to accept the selected
E
a
) and large (
to modify the waypoint.
E
) to remove the flashing cursor.
d
)
d
) right knobs to
d
) right knobs
WPT PAGES
6
Modifying
User Waypoints
115